OTTO GAS ENGINE WORKS 2167 Blue Ball Rd Elkton Maryland 21921-3330

phone: 410-398-7340

E-mail address: otto@ringspacers.com

Home Page on the web: http://www.ringspacers.com

AVAILABLE GAS ENGINE AND TRACTOR PARTS LIST EFFECTIVE 1/21/16 http://www.ringspacers.com fax:410-398-3297 ext. *51 fax only

PISTON RINGS:

BRIGGS & STRATTON:

7890 Model A; AR; F; FH; FHI; FI; H; L; M; S; T; Y;

2 1/4" bore-2-comp.1/8" / 1-oil ring 1/8" wide...................................$20.00/set

7895 Model A; AP; AGR; FJ1; H; L; LA; M; MH; MU; S; SC; T; Y; 8;

9; 9FB .. 2 1/4" bore-2-comp. 1/8" / 1-oil ring 3/16" wide ................$20.00/set 7894 Models 5S; 6; 6A-H; 6A-HS; 6FB; 6HS; 6HSF; 6S; I; IBP; N;

WI; WM; WMB; WMI 2 " Bore-2-comp. 3/32" / 1 oil 3/16" wide ..$20.00/set

FAIRBANKS MORSE

8-6050 ZD- 1 ½ HP-2 1/4" Bore-3 comp.-1 oil ring.... $25.00/set

8-6051 ZD- 2 HP- 2 3/8" bore-3 comp./1 oil ring .......... $25.00/set

8-6053 ZC-3HP- 3 5/8" bore -2-comp.-1-oil ring .......... $20.00/set

9-6082 ZC-6hp- 5 3/4: bore -2-comp.-1-oil ring........... $50.00/set

IHC MODEL LA/LB

1 ½-2 1/2HP -3 1/8" bore -3-comp.-1-oil ring.. $25.00/set

3 ½-5HP - 4" bore -3 comp. -1-oil ring......... $25.00/set

MAYTAG

Twin cylinder - 1 ½" bore, set of 6 rings ............. $15.00/set

Single cylinder -2 ½" x3/16"-set of 3 .................. $15.00/set

1 cyl. UPRIGHT-1/2HP. 2" X3/16" SET OF 3 .....$15.00/set

SPECIAL ORDERING INFORMATION FOR PISTON RINGS NOT LISTED ABOVE:

I can supply you with rings.    From my inventory of about 50,000 standard stock rings.       If you are not sure which size to order, please call, write or email me.

I must have the exact size of the piston, preferably measured at the skirt, exact ring width, and depth of groove.

PLEASE NOTE: Oil rings are double the price of compression rings. All prices listed below are for compression rings only. EXAMPLE: 3 3/8" x 5/32" comp. rings are $4.00 each. 3 3/8" x 5/32" oil rings are $8.00 each. When ordering a multi-cylinder set of rings from the charts below (9 or more rings all alike) you may take a 10% discount and shipping is free in USA only.

STANDARD STOCK RINGS

1" thru 2.499........................... $5.00 ea.                                                                                                 | MODEL ENGINE RINGS

2.5" thru 4.0" *...................... $5.00 $6.00 ea for 5/16" widths                                                            | $5.00 each for sizes listed below:

4.001" thru 4.25"..................... $6.00                                                                                                       | 5/8" x 1/16" | 3/4" x 1/16"   13/16" x 3/32"

4.251" thru 4.5"....................... $7.00                                                                                                       | 7/8" x 3/32" | 1" x 1/8"

4.501" thru 4.75"..................... $8.00                                                                                                       | 1"x 3/32"   or 1 1/16" x 3/32" | 1 1/8"x3/32"

4.751" thru 5.0"........ ..............$10.00                                                                                                      | 1 1/4"x 3/32"  or 1 1/4" x 1/8"     | 1 5/16"x3/32

5.001" thru 5.5"...................... $12.00                                                                                                      | 1 3/8"x 3/32"

5.501" thru 6.0"...................... $14.00.                                                                                                      | 1 1/2"x 3/32" or x 1/16"   or 1 1/2" x 1/8"

6.001" thru 6.5"...................... $17.00. 6.5" x ½" wide $20.00 ea.                                                          | 1 9/16" x 3/32"(this size $8.00 each)

6.501" thru 7.0"...................... $21.00                                                                                                       | 1 5/8"x 3/32" or 1 5/8" x 1/8"

7.001" thru 7.5"...................... $24.00                                                                                                        | 1 3/4"x 1/8" or 3/32"or 3/64"   or 1 13/16" x 3/32" or 1 13/16" x 1/8"

* We currently stock only 3",3 1/4",3 ½", 3 3/4",                                                                                      | 1 7/8"x 1/8" or x 3/32"

and 4" all in 5/16" wide and 4" only in 3/8" wide.                                                                                     | 2 " x 1/8" or x 3/32" or x 3/16"

Standard stock rings have straight ends only. If you want step-cut or angle-cut rings, they must be custom made. Two rings can be put in one groove if you don't want to wait the three weeks for the custom rings where the wider ring widths are not available in standard stock rings. In most cases standard stock rings are not available in widths over 3/16" for 2" thru 2 7/8" rings, for over 1/4" for 3" thru 3 3/4", and for over 3/8" for 4" thru 9" rings. The following sizes are not available as standard stock rings:

6"x 3/16"; I do have 4 3/16"x 3/8"; 5"x 3/8"; 5 ½" x ½"; 5 3/4"x 3/8"; 6" x 5/16"; 6" x 3/8"; 6 ½"x 3/8"rings available.

PISTON RING SPACERS

.030" spacers are available to take up wear space in the ring lands. If you have access to a lathe to turn piston grooves wider and straighter these may also be used where standard width rings will not fit. They are available in most diameters from 2 1/2" to  5". Cost is $4.00 each. Also available in 5 1/4", 5 ½", 5 7/8", and 6 1/4" at $6.00 each.

PISTON RING GRINDING

I can modify existing rings by grinding the side of the ring to a previously unavailable size such as a metric width or a special in-between size. Cost is $5.00 per ring extra for this service. I can do 3/4" x 1/16", 7/8" x 1/16", 1" x 1/16", 1 1/8" x 1/16", 1 1/4" x 1/16", and so on. In bigger rings I can do up to about 2 1.2" diameter.     I can also pin mill small rings for outboard or two cycle pinned applications.

CUSTOM MADE RINGS

I can re machine many stock rings to make them work to your needs but some sizes must be made by Niagara.  Please measure before you order!    Custom rings are currently being made by Niagara.  Please phone me to see if your size is available in stock rings before ordering custom rings.
Custom rings are available up to 86" diameter. Call or write for prices.

Please do not send old rings for me to measure without including the cylinder bore measurement (piston diameter). There isNO WAY short of guessing that I can measure the bore from an old ring. If you wish, you may send an old ring or a broken piece for me to check RING WIDTH ONLY if you are not sure.

ENGINE GASKETS

Maytag single or twin overhaul sets (specify) ........$15.75

Sheet head gasket material - safe asbestos substitute material

with steel core 12" x 28" x 1/16" make a plywood sandwich,

cut with jig saw and drill press ............... $25.00/ sheet

OILER GLASS

O.DIA. LENGTH PRICE O.DIA. LENGTH PRICE

1" X 7/8" $6.50 2" X 1 7/8" $18.75

1 1/8" X 1" 8.00 2 1/4" X 2 1/8" 20.00

1 1/4" X 1 1/8" 8.50 2 3/8" X 2 1/8" 25.75

1 1/2" X 1 3/8" 9.75 2 ½" X 2 3/8" 20.00

1 5/8" X 1 3/8" 14.75* 2 3/4" X 2 ½" 34.50

1 3/4" X 1 5/8" 9.75 3" X 3" 24.75

1 3/4" X 1 1/2" 18.75 3 ½" X 4" 49.50

*(1 5/8" is thin wall glass) 4 1/4" X 5" 78.00

OILER SIGHT GLASSES

 Available in the following sizes (diameter x height): 3/8"x5/8"; 7/16"x5/8"; ½"x1/2"; ½"x5/8";

½"x3/4"; ½"x7/8"; ½"x1"; 5/8"x5/8" 5/8"x3/4"; 5/8"x7/8"; 5/8"x1"; 3/4"x5/8"; 3/4"x3/4"; 3/4"x7/8";

3/4"x1", 7/8"x5/8"; 7/8"x3/4"; 7/8"x7/8"; 7/8"x1"....All above $3.50 each with gaskets.

OILER GLASS GASKETS:

½"; 5/8"; 3/4"; 7/8"; 1" gaskets.......................$.30 ea. 2"; 2 1/8"; 2 1/4" 2 3/8"; 2 ½"; 2 3/4; gaskets......60

1 1/8"; 1 1/4"; 1 1/2" ; 1 5/8"; 1 3/4" gaskets.....$.45 ea. 3"; 3 ½"; 4 1/4" gaskets ................................... .75  

BOOKS

Reprint 1909 Otto catalog - color cover - 1971...$19.75

GAS ENGINE DECALS

1 1/2 HP. John Deere $4.00/pr. 3 HP. JD $4.00/pr. 6HP. $5.00/pr. | Cushman round, 1bear or 3 bears $4.00 ea.

Briggs & Stratton - Early yellow $4.00 ea. Late gold $4.00 ea. | Novo or International 2 ½ x 6 $4.00 ea.

IHC double globe 2"x 2 3/4" $4.00 ea. or 3 ½" x4 ½" $4.00 ea. | Hercules or 3" IHC gold round $6.00 ea.

McCormick Deering 2 ½"x6 ½" $4.00 ea. or 2 ½"x12 ½" $5.00ea. | The Jaeger or Alamo Or Clinton $4.00 ea.

Wisconsin Air Cooled $4.00 ea. | The Lauson ..... $4.00 ea. | Taylor Vacuum specify type A, B or C $4.00 ea

Any size Stover $8.00/pair. | Fuller & Johnson $4.00 ea. | Olds round $4.50 ea.

MAGNETO PARTS FOR GAS ENGINES

Magneto coil cover & lead out for Montg. Ward "E2" Washing machine engine $50.00

Magneto coil cover and lead out for Wico AH used on IHC LA/LB $50.00

Fairbanks Morse R-1 leadout $50.00 Fairbanks Morse R-1 collector spool $50.00

Magneto coil cover and lead out for Fairbanks Morse RV1 used on FM ZD's and others $50.00

Condenser for Maytag single & twin with Eisemann magneto (not for Wico). Use with jumper wire. $5.75

The following parts fit IHC LA/LB IHC H-1 mag only: | 47449DAY IHC coil cover w/lead out. $16.00

IH-2 point /condenser kit IHC H-1 $19.75. | RW104 new coil winding for IHC H-1 mag. $43.00

MGK103 Gasket kit for IHC H-1 mag $3.50. | 71455C91 condenser for IHC H-1 mag $3.75

IHC H-1 coil cover cap with lead out. Has early rounded IHC logo $45.00 ea.

SPARK PLUGS

W-14 Champion 7/8" thd. spark plug................................................$9.50

W-18 Champion 7/8" thd. long reach plug (same reach as 3X)..........$9.50

W-20 Champion 7/8" thd. same as W-18, only one step hotter..........$15.50

D89D Champion 14mm thd. long electrode for IHC WD9, MD, 400D $8.50

3095 Autolite ½" pipe thd. equivalent of 25 Champion......................$7.00

3076 Autolite 7/8" thread 5/8"reach equivalent of W-14 Champ........$6.00

C-88L AC 18mm thd. same as C-87 only has long hex ....................$19.50

388 Autolite 18 mm thd. for all styled JD's,same as D21 Champ.......$3.00

458 Autolite 14mm thd. for Maytag twin + B & S 3/8" reach...........$2.50

OLD PATTERN WIRE

200 Old time copper spark plug wire with yellow, black and red cloth loom covering and lacquer

finish...7MM standard size:. $1.50/ft.

205 Copper primary (igniter) wire. Same as above, but with thinner insulation.

18 gauge: (for models) 0-99 ft.$1.00/ft,or $49.00/ 100 ft. roll

14 gauge: 0-99ft. $1.00/ft.; or $100.00/100 ft.roll.

12 gauge: $2.00/ft.

Bronze Check Balls

206 Bronze check balls - outside dia.:1/16", 3/32"; 1/8"; 5/32".$0.35 | Bronze check balls - outside dia.:5/16"; 3/8".....$0.50

Bronze check balls - outside dia.:3/16"; 7/32"; 1/4"............$0.40 | Bronze check balls - outside dia.:7/16"; ½"......$1.50

Bronze check balls - outside dia.:5/8" , 3/4".......................$3.00

207 Brass spark plug thumb nuts. Standard 8-32 thd. .............5/$1.00

208 Forked thrust type spark plug terminals-NOS.steel......... 2/$1.00

208.5 Ring type spark plug terminals - NOS. steel ....................2/$1.00

209 Forked thrust type spark plug terminals-BRASS............ 4/$3.00

209.5 Ring type spark plug terminals - BRASS ....................... 4/$3.00

SPST Steel plug terminal-fits straight down over top................. 4/$1.00

210 Brass high tension wire terminals. Fits over wire end where

it is inserted in a magneto lead out or distributor cap.........6/$1.00

325 Associated tapered igniter springs.........................................$6.75

326 Aermotor 8 cycle governor ball spring................................. $4.75

333 Igniter points: 1/8" dia. shaft one pair.................................. $7.25

335 Tin gas tank screw filler necks and caps. Assortment of one each

of 3 sizes. 1"; 1 1/4"; and 1 3/4" For old or new tanks per assortment of 3/$2.50

338 Plastic 5"x5" high folding funnel. Folds to fit in a drawer, toolbox, or battery box. ½" spout.

Fits Maytag perfectly....$0.50

GAS ENGINE AND TRACTOR PAINT A high quality Alkyd-Enamel paint that matches the original perfectly.

*JD Green $13.50/qt. / 39.00/gal. | *JD Yellow $11.50/qt. / 34.00/gal. | 12 Fl. Oz. spray

*IHC Red $11.50/qt. / 34.25/gal.. | OLIVER Green $11.50/qt. / 34.25/gal.. | cans available

CASE Flambeau Red$14.25/qt. / 45.00/gal. | *ALLIS CH.Orange $14.00/qt. / 42.00/gal. | at $3.50/can in

*CASE Lt. RC Grey for R/RC only- $9.75/qt./$29.00/gal.*Red Oxide Primer / 29.00/gal. | colors marked w/*

CATERPILLAR Hiway Yellow 25.00/gal.

Naptha thinner for above paint $6.50/qt. / $13.00/gal.

MICA WASHERS

Available in the following sizes: OD. X ID. ½"x1/4"; 5/8"x.150"; 5/8"x3/16"; 5/8"x1/4";

3/4"x.205"; 3/4"x1/4"; 3/4"x5/16"; 3/4"x3/8"; Each unit is approx. 3/4" high stack...$3.50/unit

ORDERING INFORMATION

PAYMENT: Check or money order payable to DAVID H. REED. $10.00 extra charge if you prefer C.O.D. (plus 10%

shipping as below). Maryland residents please add 5% sales tax. Check or M.O. in US$ drawn on US bank please.

PRICES: Subject to change without notice.

RETURNS: Material may be returned prepaid after inspection-- within a reasonable period of time. Custom made rings are not returnable, unless it is our mistake.

ORDERING: State catalog number, part name, quantity, and size. If you call in an order and you can't reach me daytime, try evenings. Sometimes you can catch me on weekends too. All items in this list are MADE IN USA unless noted as "(imported)".

SHIPPING: Please add 10% of order for shipping and packing. This includes tractor parts too. Orders over $200.00 shipped free.(USA only) Foreign orders extra. Be sure to give your street address for USPS. Orders go first class or Priority Mail,. Orders usually are shipped the same, or next day, unless an item is out of stock, or special ordered.

We hope you can come out to our engine show held here six miles northwest of Elkton on MD route 545 every September. No charge to buy, sell, trade, look, or tell tall tales. Held here every year the weekend after the MD. Steam Hist. Soc. show at Arcadia, MD. This year's dates are Sept. 25,26, 2017.A "fun" tractor pull will be on Sept. 26 weather permitting if the tractor pull sled is available. Email me for details.

TRACTOR PARTS

PART NO. CASE TRACTORS MODEL L,LA

720 Piston ring set 4 5/8" bore. ...$86.00 | O4195A1 Valve springs L, LA ................................$7.50

LA CASE Decal set...................... $24.00 | A31102 Fuel strainer / sediment bowl L,LA.............$19.00

L CASE 9 pc. decal set................... $23.00 | Tin grille & flat screen w/ canvas curtain for L rad.... $65.00

4346A Radiator cap - L..................$14.50 | VI174 Valve seat inserts............................................. $9.50

02696AB "V" Fan belt-L................. $15.00 | O966A Gasket for 4369A oil filler plug L,LA,C,DC....$2.50

08159AB Oil filter - LA....................$11.25 | 0865AB Radiator cap gasket for L,C,CC,RC,DC,LA. $3.00

Exhaust elbow for manifold L/LA $74.00 | Exhaust elbow for manifold 400 gas / Dsl. $68.00

1996487 Starter switch for LA,DC,SC,and industrials - same as original.............................. $8.75

V7349S Overhaul gasket set-(full overhaul set for the L or LA engine only .................. $310.00

Seamed plain pipe for air int. stack no holes/screen 3" for LA - use w/ 07080A1 cap $16.00

Complete finished air intake stack 3 1/8" ID for "L"................................................... $65.00

BK53 Basic carburetor kit for L,LA with Zenith #6799 & 8714........................................$20.00

C553 Complete carburetor kit, same as BK53 but w/ suction tube idle jet........................ $30.00

UTG25 Universal generic mechanical temperature gauge fits 2"hole................................ $22.00

PART NO. CASE TRACTORS - MODEL C,CC,D,DC

02696AB "V" Fan belt............................... $15.00 | VI148 Valve seats, each............................................ $7.75

4346A Radiator cap C,CC,L,RC.............. $14.50 | 07583AB Exhaust and intake valves each................ $26.00

08152AB Oil filter - D,DC,S,SC............. $8.50 | 0844AB2 Valve spring each....................................... $6.90

2C-7759 Piston ring set--3 7/8" bore........... $79.00 | 03501AB Gearshift knob (threaded) for D,S,LA series $3.50

EBA-2 Starter bendix drive assembly-D,DC ... $35.00 | BK57 Carb kit for 300/350 gas....................................$18.00

PART NO. CASE TRACTORS - MODEL C,CC,D,DC -continued- ADD 10% SHIPPING

VR1823 Voltage regulator-6v.POS DC,LA,S....$40.00 | 08044AB Clutch throwout bearing, D,DC,SC .......$20.00

O5945AB Spring that holds crank under seat-DC. $11.00 | O891AB Manifold gasket each - 2 required .......... $9.75

A31102 Fuel strainer /sediment bowl C,D,L,S...$19.00 | O3154AB Water pump spring fits C,CC,DC,L,LA ..$4.00

4976A Valve lifter tappet, .010' oversize......... $8.00 | 04234AB Oil pump relief plunger spring ............ $4.75

Exhaust manifold elbow for D,DC,C,CC.... $48.00 | C CASE 9 pc. decal set-Specify C or CC set ..........$22.00

BK50 Basic carb kit for C,CC w/ Zenith #7124...$16.50 | DC3/SC3 Eagle hitch cast step plates per pair...... .$34.50

BK51V Basic carb kit for D,DC w/ Zenith #8964..$19.00 |rubber sleeve O-Rings each also available for L & SC$12.50

NOTE: Basic kits contain throttleshaft, float valve and gaskets | Spring wire bail to secure radiator cap , C/D/R/L. $7.00

V7365S valve grind gasket set ...................................$86.00 | 71-28 Carb high speed needle w/ packing DC,SC $11.50

C551V Complete carburetor kit for D,DC. Same as BK51V, but with extra parts. Fits Zenith #8964. $29.50

DC CASE Decal set...("D" or "DO" decal set available for same price)...........................................$21.00

FW103 Front wheel bearing kit with races & felts - C,D,& DC.................................................. $40.00

07080A1 Bowl for top of air cleaner stack (fits all but S/V series)...................................................$15.00

Exhaust elbow 45 degree for CO/DO .....................................................................................$72.00

PART NO. CASE TRACTORS - MODEL S,SC PART NO.

BK52V Basic carburetor kit for Zenith #9667................ $16.00 | F7518S Full engine gasket set...................... $87.00

V7518S Valve grind gasket set ..................................... $43.00 | O5749AB Valve spool.................................... $3.25

O5746AB Exhaust valve each............................................$18.00 | O5747AB Intake valve each...........................$11.00

O5945AB Spring that holds crank under seat $11.00

2C5117 Piston ring set 3 ½" bore to #8027114................ $83.00 | O5807AB Radiator cap gasket only ...............$3.50

SC CASE Decal set ("S" set avail. for same price)............ $21.00 | Rebuilt waterpump w/new shaft,seal,bearing$120.00exchange

VG386 Valve guide same as 5619A...............................$ 4.75 | Exhaust elbow needs 6 holes drilled $65.00

05731AB Governor spring for linking end of throttle rod to governor ... $6.25

KTCA2136 Carb kit for SC-3 with 3 5/8" bore Zenith #11535 kit doesn't include throttle shaft $22.00

Most of the parts listed to fit C,DC tractors are available to fit S,SC. Write or call for prices and availability.

PART NO. CASE TRACTORS MODEL R,RC with Waukesha "FC" engine

5060 Piston ring set -- 3 1/4" .bore................$75.00 | 03782AB Fan belt.................................... $11.50

V713 Exhaust valve.......................................$15.00 | 4346A Radiator cap................................ $14.50

V714 Intake valve...........................................$9.75 | VS405 Valve springs................................ $6.50

VG296 Valve guide ......................................... $5.75 | VK123 Valve key (one half)........................ $.80

CB4014 Generator cutout fits RC & V...............$19.75 | CB139P Rod bearings STD.,.010,.020,.030 $159.00

RC CASE 9pc.decal set Specify red/gray paint.$21.00 | Exhaust elbow for manifold top ... $76.00

BK56 Basic carburetor kit for later Zenith #10136 (03093HT) $17.50 | MS8593B manifold gaskets.....$20.00

Tin radiator grille with screen for front of radiator with canvas curtain for unstyled tractors .............. $65.00

PART NO. CASE TRACTORS MODEL VC,VAC PART NO.

727 Piston ring set for V / VC 3" bore ........... $70.00 | F600I228 Exhaust valve for V/VC .............................. $12.50

2C7751 Piston ring set for VA /VAC 3 1/4" bore .$75.00 | 03782AB Fan belt (for use without generator) VC,VAC.$13.00

VT2299 Radiator cap gasket for"V/VC"series only .$2.00 | VT35 Radiator cap W/O clip-spring"V/VC"................$23.00

F7519S Full overhaul engine gaskets for VA-VAC $92.00 | VT3641 Wooden hood prop ........................................... $6.50

B51772 Carb float VC or VAC Marvel Sch. carb.... $8.00 | B51776 Large Marv.Sch.carb float430/530/630.............. $23.00

VT3589 Oil filter for VAC,200,300,310,400,600B..$11.75 | VS6907R Valve cover gasket 124-159 engine.................$12.00

BK54 Basic carb kit VA/VAC Marvel S. #TSX114. $16.00 |BK55 Basic carb kit for V / VC Marvel Schebler #TSX43 .$16.50

PK257 Sleeve & Piston kit W/ rings,wrist pins,& "O" rings set of 4. $450.00

F7183PT Full overhaul engine gaskets for V / VC less timing cover.... $80.00

VAC CASE Decal set ("VA" & "VC"decal set available for the same price)...... $21.00

Many new, new old stock, and used parts such as valves and gaskets are available. Call or write for availability.

PART NO. IHC TRACTORS - MODEL F-12, F-14 PART NO.

BK7V Basic carburetor kit F-12 /F-14.................. $21.00 | 28953D F-12/F-14 fan belt ....................... $13.00

TP110 IHC red paint -- quart can......................... $11.50 | F-12/14 fuel pump kits ............................ $18.50

Manifold gasket only ..................................... $12.50 | F-12 decal set - 9 pc. set ......................... $17.00

21344DAY Distributor cap for F4 magneto .................$65.00 | RW-104 New coil winding -F-4. mag...... $44.00

24434D Sleeve "O" ring ea. .................................... $6.00 | F-14 decal set - 10 pc set ..........................$17.00

PK150 3 1/8" bore sleeve set w/pistons, rings, pins.$248.00 | F7364S Full Overhaul. gasket set............. $77.00

PART NO. IHC TRACTORS - MODEL F-12, F-14 PART NO.

376375R91 Oil filter element fitsF-12,F-14,F-20,F-30,10-20...............$6.50 | H7364S Valve grind gasket set...$64.00

207834 Generic oil pressure gauge 0 - 30 psi. Does not say "IHC".$14.00

706 Piston ring set - 3" bore - 3 ring piston F-12 only................ $39.00

2C710 Piston ring set - 3" bore - 5 ring piston F-12, F-14..... .......$65.00

CRK113 Rod bearing inserts - 4 pairs per set STD,.002,.010,.020 $42.00

PART NO. IHC TRACTORS - MODEL CUB, 10-20, 15-30, F-20, F-30

712 F-20 3 3/4" ring set.................................... ..... $69.00 | F-20 or F-30 decals - 15 pc.set........................$25.00

F-20 & Regular full engine overhaul gasket set ..$51.00 | F-20 & Regular head set gaskets .................... $38.00

F7560S Cub Farmall overhaul gasket set..................... .$77.00 | Farmall Regular decals - 13 pc. set ................$25.00

CRK60 Cub rod brg. 4 pr./set STD,.002,.010" .............$29.00 | Cub main brg. 3pr/set STD,.010" ................. $37.00

251260R1 Cub intake valve each ......................................$8.00 | 251261R2 Cub exhaust valve ...................... $11.00

251262R2 Cub valve springs each .................................. $3.00 | 352973R3 Cub valve guides each................... $5.00

351773R91 Cub 6.5"OD. 15/16"x10spline hub clutchdisc.$55.00 | 351760R91 Cub pressure plate 6.5"............. $110.00

2C7859 Cub Farmall ring set 2 5/8" bore ......................$56.00 | IHC Cub farm tractor decal set.....................$20.00

Coil cover cap for J-4 IHC Cub magneto ...........$50.00 | Dist. Rotor w/ gear teeth for J-4 Cub mag .....$50.00

BK20 F-20/F-30/W-30 basic carb. kit -Zenith K-5.......$21.00 | BK-18 carb kit Cub to #3123389 ..................$18.50

2C714 10-20 4 1/4" bore ring set...................................$82.00 | I-12/I-14 ;O-12/O-14 - 9 pc.decals ................$21.00

F7170S 10-20 full set gaskets......................................$180.00 | 10-20, 15-30, 22-36 9 pc decals................... $24.00

10-20 / F-30 manifold gasket only ......................... $13.50 | W-30 / W-40 12 pc. decal set ..... ..................$26.00

Regular IHC brass carb kit Specify............$99.00 | F7316S F-30 full set gaskets........................ $138.00

E4A320 Thumb nut for E4A IHC mag dist. block ............. $2.50 | 10057D Thumb nut for Splitdorf Dixie ...........$2.50

724 F-30, W-30 4 1/4" bore ring set............................$59.00 | WD-9 or WDR-9 decals ................................$32.00

"H",Super "H" full overhaul gasket set ..................$86.00 | W-12, W-14,W4,W6,W9 decal set.................$22.00

BK 10V Carb kit "H" #45108DB & 50981DA ............. $11.00 | BK11V "M" #47387DB & 6513DX.............. $12.50

BK 12V Carb kit "M" #8867DX & 356948R92 ........... $12.50 | BK 9V "A,B" "Super A" # 9752 .................. $14.50

7734 22-36 4 3/4" bore ring set.................................$90.00 | Super A,C,H,M,MTA decals .........................$22.00

14976DX 22-36 /15-30 carb. throttle shaft.......................$6.50 | 1945+International A,B,C,H,M decals ...........$22.00

376376R91 22-36 / 15-30 oil filter element ..................... $6.90 | 1939-44 Mcdeering A,B,H,M decals...............$22.00

2C5082 WD-40 4 3/4" bore ring set.......................... $122.00 | 16131DA fan belt - Farmall M,MD,W6 .........$13.75

1998TAOE oil check cock valve like orig. F-12, 10-20, $22.00 | IH-2 Point/condenser set H-4 /H-1mag ............$9.00

15-30 4 ½" bore ring set ...................................... $89.00 | 47449DAY coil cover w/ lead out H-4 ...........$14.50

MGK103 Gasket set for H-4/H-1 mag..............................$3.25 | RW104 New coil winding -H-4/H-1 mag .......$44.00

F7732S Overhaul gasket set for Farmall A or B ............$56.00 | 71455C91 condenser for F-4,H-4,H-1 ..............$3.75

CRK113 Farmall A & B rod brg.set/4 pr.STD,.002,.010.$42.00 | MBK113 Farmall A & B main brg.set ............$48.00

822C Sleeve "O" ring ea. for 10-20 or F-30 ................. $6.00 | 53783D Carb. float for Cub,A,B,C ................ $13.50

23995DC Vented fuel tank cap for Cub,A,B,C,H,M,140....$3.50 | 5369262R1 Generic Oil press.80# ga..............$14.00

43658D Hood emblem"FARMALL"for A,B,BN,C,SuperC$32.00 | 43659D Hood emblem "McCORMICK" W9. $32.00

PART NO. CAT, MINNEAPOLIS MOLINE, MASSEY HARRIS, ALLIS CHALMERS AULTMAN TAYLOR

Silver King 5 pc. decal set specify red or black hood decal $15.00

Caterpillar red wavy decal for grey 10,15,30,60 each ........$3.00 | Caterpillar black wavy decal for yellow tractors ea.$4.00

Minneapolis Moline decal sets: U,UB,UB dsl.,R,Z,ZB .$20.00 | Minn. Moline decal sets: G,GB,GB dsl,UB special ..$20.25

BK70 MM carb kit for U, UT & H w/ TSX67 carb........... $16.00 | BK71 MM carb kit for Z,ZA,ZT,G4 w/ TSX97 carb $16.00

BK72 MM carb kit for R,RT w/ TSX30/36 carb.......... $16.00 | BK73 MM carb kit for GTA,GTB w/ TSX68 carb. $17.00

BK74V MM carb kit for ZT w/ TSX12 carb ...................................................$16.50

7745 MM piston ring set for J,L,R,RT,RS,Z,ZA,ZB,ZT - 3 5/8" bore..................... $70.00

2C5440 MM piston ring set for 403-4,403C-4 to#02009310 GB,GTB,GT,GTA $170.00

F7625B MM full OH. gasket set for RT,RTE,RTI,RTM,RTS,RTU,L-UNI,Z,ZB $72.00

H7468B2 MM Valve grind set for 283C+283C4 engine U,UB,UBE,UTLX,UTS.$120.00

OS 10303T Oil pan set for above.......................................................................... $15.75

H7550B3 MM Valve grind set for 403-4A engine w/small water holes GE,GTD,GTI,GTB,GTA,GT,GB $120.00

OS10103T Oil pan set for above except for GE engine..........................................$12.75

Massey Harris Pacer carbkit M-S#TSX-541.............................. $18.00 | F7378 Allis Chalmers B overhaul gaskets ... $61.00

BK20 Allis Ch. U,UC carb kit #6496 ,6699 &,6817 ........... $21.00 | BK21 Allis Ch. C carb kit Zen# 10699A ..... $18.00

BK21AV Allis Ch. C,B,RC carbkit# 10902A,10903A,19698A$17.00 | BK22V Allis Ch.B,C,RC carbkit# 9705,9706,$17.00

PART NO. MASSEY HARRIS, ALLIS CHALMERS

BK25V Allis Ch. WC,WD carbkit Zen#9797,10981A.8979 $17.00 | BK27V Allis WC,WDcarbkitMS#TXS159,422 $17.00

F7514S Allis Ch.gasWC,WD,WD45,D17 overh. gaskets.... $96.00 | F7559S Allis Ch."G"& MH Pony overh.gask...$69.00

F7183PT Massey Harris 20,21,22,30,101jr overh.gask..........$81.00 | F7191S7 MH 101Sr,44(6) gas overh.gasket.... $85.00

F7624B Massey Harris 44,44D H260,HD260 overh.gask....$116.00 | H8053B MH 44sp dsl,444dsl HD277head set....$90.00

Massey Harris decals: 555,55,44,33,333,30,20,81,Pony,Pacer,101Sr.................... $20.00

Allis Chalmers decals: U,UC,G,WC unstyled,WC styled,C,CA,WD,WD45,B,RC.$20.25

We have ring sets and gasket sets for most MH & AC models. Call or write for prices.

PART NO. OLIVER

Oliver 60,70,80 row crop and 70,80,& 88 Industrial decal sets .......$19.25

Oliver 80 Standard, 99, Oliver Hart Parr 60,70 row crop decals ......$21.00

Oliver 66,77,88 Row crop w/ Yellow numbers; Super 55,66,77,88.. $22.00

Same as above 66,77,88,R.C. & Super 55,66,77,88 only "DIESEL" $23.00

Oliver 550,660,770,880 gas decal sets ............................................ $25.00

Oliver 550,660,770,880,950,990,995 diesel decal sets .................... $27.00

2C4592 Oliver piston ring set for 28-44, 90,99 gas 4 3/4" bore....................$95.00

2C7756 Oliver piston ring set for 70 - 3 1/8" bore - w/ 1/4" oil ring.........$86.00

4157 Oliver piston ring set for 80 - 4 ½" bore -w/ 3/16" oil ring .........$70.00

2C7748 Oliver piston ring set for 60 - 3 5/16"bore....$80.00 | F7370S Oliver 70 overhaul gasket set...................... $181.00

H7540B Oliver 60 valve grind set gaskets................$106.00 | BK64 Oliver 60 carb kit #TXS49;TXS120 .............. $12.00

H7370S Oliver 70 valve grind gasket set .................$126.00 | BK63V Oliver 70 HC carb kit - #8627, #9725A..... $18.00

100126AS Oliver 70 oil filter 66,77, 88, 660,770,880... $9.90 | OL1 Point & condenser set early Delco,55,66,77,88.. $5.50

PART NO. JOHN DEERE TRACTORS ADD 10% FOR SHIPPING

Model "D"

F7342S-2 Full set gaskets for "D" after s/n 109942 ................... $195.00 | Styled "D" Decals 10 pc. set.....$19.00

BK-31 Carburetor kit - carb.# DLTX-6, DLTX 16, DLTX 63 ... $19.75 | Unstyled "D" Decals 13 pc. set. $20.00

Piston ring set - specify oversize- 6 ½"$167.00 / 6 3/4" $189.00 (We stock .125 overs for the 6 3/4"@$189.00)

Model "B"

BK-36 Carburetor kit - carb.# DLTX-10 Unstyled .... $16.50 | BK-37 Carb kit - carb.# DLTX 34... $16.00

BK37A Carburetor kit - carb.# DLTX-67 , DTLX-73.. $17.00 | AB2700R Muffler for "B"s/n96000+ . $19.00

GK35 Carb. gasket kit only, fits all A,B,G,D #109944+ $3.50 | Unstyled "B" decals - 11 pc. set........ $20.00

B-158-R Pulley clutch facing - to s/n 200999 - each...... $12.50 | Styled "B" decals - 10 pc. set............. $20.00

B2354R Pulley clutch facing - s/n 201000 up each ...... $14.50 | AR26350 Oil filter element fits "A","B" $6.75

AB3849R Brake lining & rivets s/n 201000 up set / 4.... $25.00 | AR12011 Coil for Wico "C"magneto.. $83.00

D636R Front wheel felt - fits all "B"'s............................ $3.75 | AR12006 Coil for Wico "X"magneto . $43.00

B89R Retainer for above ...............................................$6.00 | JT2 Point & Condenser kit-Wico C ... $19.00

F7381S Full set gaskets - unstyled "B" to s/n 59999... $139.00 | JT3 Point & Condenser kit-Wico X ... $15.50

F7513S Full set gaskets - styled "B" s/n 96000 up also fits "50".........$79.00

AB4748R Pulley brake lining - fits all A's, B's,and G's. clips on ........ $7.75 (imported)

FW111S Frnt.wheel bearing kit w/both brngs.,seal,& retainer-1 whl. $40.00

7741 Piston rings - Unstyled to #59999 - 4 1/4" bore ...................... $49.00

2C7733 Piston rings - Styled # 60,000-201000 4 ½" bore.................$68.00

2C4965 Piston rings - Cyclone # 201000+ 4 11/16" bore.................. $79.00

Model L, LA

BK54 Carburetor kit, L & LA #TXS13,45,60,85,89,90,91,450... $16.00

Piston rings - specify 3 1/4" or 3 ½" bore .......................... $40.00 | L,"LA"decal set,8 pc.set specify styled/unstyled . $18.00

Model "M" , "MC" , "MT", "40", "320"

BK39A Carburetor kit "420" -carb#TSX641, TSX-678 .... $16.50 | AM3100T Sediment bowl .......$17.50

BK39 Carburetor kit -carb # TSX-245, TSX-475, TSX-530..$16.50 | "M", "MT", "MC" decal set ... $20.00

F7869B Full set gaskets for M, MC, MT, 40, 320 .................$73.00 | "40","420", "430" decal set .. $ 22.00

M100T Intake valve ea........................................................ $15.00 | M101T Exhaust valve ea...... ..$14.00

M102T Valve springs ........................................................... $2.95 | B367R Valve retainer ............... $.50

M40T Valve guide ...............................................................$8.00 | Piston ring set - 4"bore ... ......$40.00

H7869B Valve grind gasket set for M, MC, MT, 40, 320..... $44.00 |AH1082RT Oil filter for "H" & "M" series. $6.75

JOHN DEERE TRACTORS - continued

PART NO. MODEL "H"

BK38 Carburetor kit -carb # DLTX-26,DLTX-46.$16.00 | GK36 Carburetor gasket set only.. $ 3.50

Piston ring set - 3 9/16" bore STD, .030,.045,.090...$40.00 | "H" decal set - 7 pc. set ................. $20.00

AH1082RT Oil filter for "H" & "M" series................ $6.85

MODEL "A"

BK32 Carb. kit Unst.-carb #DLTX-15,17,18,19,24,33,41,51 $16.75 | BK34 Carb kit for Styled"A"carb.#DLTX-53 $16.50

BK34A Carburetor kit for late "A" - carb # DLTX- 71,72......$17.00 | GK35 Carb. gasket set only-fits all A's,B's,G's,$3.50 AR26350 Oil filter element fits "A","B","D","G", "R"................. $6.75 | AA2214R Muffler - fits all "A"'s ............... $22.00

Decal set unstyled "A" - 12 pc. set..................................$20.00 | Decal set styled "A"-10 pc. set ............$20.00

C614R Pulley clutch facing for all "A"'s - each...................... $15.00 | A4028R Clutch drive disk for all "A"'s. ..... $143.00

1A4253R Turning brake linings for "A" set of 4..................... $24.00 | R21753 Brakeshoe return spring-13/16"dia.for "A"3.50

D636R Front wheel felt seal only......................................... $3.75 | D635R Retainer for D636 seal at left............. $6.25

FW109S Front wheel bearing kit - 2 bearings, cups, seal, retainer, for 1 hub - fits all tricycle "A"'s except AN single wheel $55.00

FW153S Front wheel bearing kit for AN, BN - single front wheel..$55.00

F7380S Full set gaskets - unstyled "A" s/n 41000-487999.............. $99.00

F7744-1 Full set gaskets - styled"A" s/n 488000-583999.................... $88.00

F7744SBX Full set gaskets for styled "A" s/n 584000 up..................$99.00

722 Piston rings: 5 1/2" bore, all 1/4" wide unstyled ...................$99.00

2C7731 Piston rings: 5 1/2" bore, 3/16"comp, 5/16"oil styled A,60...$99.00

MODEL "GP"

Valve spring ea. 2 1/16" O.D. .... $9.25 Decal set - 12 pc set... $26.00

Piston rings : Specify 5 3/4" std.,.045,.090, or 6"std.bore$125.00/set

Piston rings : For 6.045" and 6.090 oversize bores........$125.00/set

C1850R pair of carb float blocks Ensign BK late carb $25.00/pr.

BK32 Carburetor kit for DLTX-15, 17 #223804 up........... $ 19.75

MODEL "G"

BK32 Carburetor kit for DLTX-15, 17, 18, 19, 24, 33, 41, 51...........$19.75

AA2214R Muffler-Fits all"G"'s-has notch in side to clear steer.shaft .. $22.00

C614R Pulley clutch facing for all "G"'s - each.................................. $15.00

AA4253R Turning brake linings for"G" set/4 $24.50 | R21753 Brake shoe return spring - 13/16"diameter $3.25

AR26350 Oil filter element fits "B", "D","G", "R" $6.75 | 2C-7842 Piston rings 6 1/8" bore, all 1/4"wide.... $129.00

Decal set unstyled - 12 pc. set.............. $21.00 | Decal set styled - 10 pc. set ................................ $20.00

MODEL "R"

AR604R Turning brake linings - set of 4 .......... $44.00 | Decal set for "R" or "80" - specify - $24.00

R21753 Brake shoe return spring - 13/16" diameter $3.50 | Piston ring set 12 ring set 5 3/4" ....$155.00

MODEL "50","60","70",&"70 Diesel"

Decal set for 40,50,60,70,320,420,520,620,720,330,430,530,630,730 "gas" ...$22.00

Decal set for "70","80","720","820","730","830" "Diesel" ............................$24.00

AA6129 Pulley clutch disk w/ bonded lining for 60,620,630,70,720,730 ............... $39.00

BK33 Carburetor kit for "50" DLTX-75,86...$18.00 | BK 35 Carb Kit for 60,630,70,730 $18.00

We have pistons, rings, bearing inserts, valves, guides and springs for the later styled tractors.

Write or call for prices. We also have parts tractors: Allis Ch. WC,WD; JD A,B, H, LUC; Case

C,CC,DC,L,LA, VC,VAC, SC,RC,18-32,22-40; IHC F-12,F-14,F-20,F-30,10-20,Reg.,22-36,H,A; Cat R4;

M.Moline RTU; ZTU; Cletrac AG